Woven vs. Composite Strapping: What are the Differences?

14 June 2022

Let’s have a look at the many strapping options that are widely accessible in the market. For storage and shipping, strapping is nothing more than a flat ribbon used to link goods together. It can also be used to strengthen shipping boxes and pallets.Focus on composite and woven strapping for the time being. There are a variety of materials and applications for each form of packaging. Focus your attention clear, we’re strapping tight.

How the Two Differ From One Other

Woven and composite straps are two of the most commonly utilised in the cargo securement business. In general, they’re both excellent options for safeguarding your cargo, but there are some important differences between the two.

Woven straps are constructed of polyester fibres that are woven into a single piece. Its sturdiness is due to the multidirectional patterning of the fibres, which weave both horizontally and vertically. Polywoven straps can maintain good tension on hard weights thanks to their flexible nature. It helps to absorb some of the shock and impact during transit while still retaining its position because of the woven material’s minor elongation.

Polyester fibres are woven vertically into a composite strap and then covered with a clear polypropylene layer to form the strap itself. Allowing for some minor elongation while in transit is made possible by the covering of polypropylene. The composite strap is stiffer than the polywoven strap because of its polypropylene coating.

The Finish on the Buckles

Wire buckles are available for both woven and composite straps, and each is designed to be used with a certain type of strap. The buckles have a different finish, which makes a difference. Phosphate-coated wire buckles are recommended for woven straps. The buckle’s phosphate coating increases the amount of resistance it has to the woven material. The friction between the buckle and strap would wear out a composite strap when utilised with phosphate coated wire buckles. Galvanized wire buckles should be used instead of composite strap buckles. The composite straps threadeasily through the galvanised buckle’s clean finish and keep in position thanks to the strap’s sturdiness. Because there is no friction between the buckle and the woven strap when using galvanised buckles, the strap may come off the buckle.

The Important Takeaway

Both of the aforementioned options have the benefit of being lightweight, making them an excellent choice for use while travelling due to their portability. Workers are at a lower risk of injury with woven and composite strapping since it does not have any sharp edges.When it comes to ensuring the success of a project, having the appropriate straps, seals, and equipment is always essential. Before you begin packing your shipment, you must have all of the necessary information to avoid making any mistakes that may end up being very expensive.

Melbourne’s top packaging supply company, Westside Packaging Systems Australia, is well-known for its vast choice of Steel Strapping, Plastic Strapping, and Stretch Wrap films. To keep on top of the competition, we strive to offer a wide variety of new and diversified products. So, our steel strapping, plastic and stretch wrap films are proven to be suitable for a variety of applications and sectors.

If you need a strapping company you can trust, don’t hesitate to give us a call!

Optimized by: Netwizard SEO